PE pipe production line

pipe extrusion line

φ20-63 PE pipe production line

Configuration

Applicable raw material: PE80, PE100

1. Applicable range: φ20-63
2. Total output:250kg/h
3. Condition of environment:
   1. place: in room
   2. safe power supply
   3. 0.85 with no condensation point
   4. temperature: 0-40°C.
4. Using condition
   1. total power: 120KW
   2. power supply: according to customer’s requirments
   3. requirement of the water consumption: 0.5 m3/min 0.15-0.2 Mpa, water temperature≤15°C
   4. requirement of gas supply: 0.4m3/min,≥0.6Mpa.
5. The configuration list of the production line

1. SJ65/33 high-effective extruder                    1 set

2. AL300 vacuum automatic loader                  1 set

3. HD100 hopper-style dryer                              1 set

4. Compound extrusion die, mould                    1 suit

5. SJ20/20 extruder for mark line                       1 set

6. SJGFD63 vacuum calibration tank                1 set

7. SJGFD63 water cooling tank                         2 sets

8. DY-2 haul-off                                                     1 set

9. QG63 cutter with no crumbs                           1 set

10. Winder                                                            1 set